Accessories

secureThis is a secure SSL encrypted page.

6 FOOT TALL 1 INCH 5/8TH BLACK POWDER COATED GALVANIZED POST ($35 each – shipping included)

Our powder coated high gloss black galvanized steel fence posts come in 4, 5, and 6 foot heights. This is for our 6 (six) foot post. Our posts are easily placed in every no-dig sleeve, and are built to last in the harshest weather – from Arizona to Canada.

This includes:

  • 1 5/8th inches post (6 foot tall)
  • 1 no-dig sleeve
  • 1 decorative post cap
  • 2 post collars

5 FOOT TALL 1 INCH 5/8TH BLACK POWDER COATED GALVANIZED POST ($30 each – shipping included)

Our powder coated high gloss black galvanized steel fence posts come in 4, 5, and 6 foot heights. This is for our 5 (five) foot post. Our posts are easily placed in every no-dig sleeve, and are built to last in the harshest weather – from Arizona to Canada.

This includes:

  • 1 5/8th inches post (5 foot tall)
  • 1 no-dig sleeve
  • 1 decorative post cap
  • 2 post collars

4 FOOT TALL 1 INCH 5/8TH BLACK POWDER COATED GALVANIZED POST ($25 each – shipping included)

Our powder coated high gloss black galvanized steel fence posts come in 4, 5, and 6 foot heights. This is for our 4 (four) foot post. Our posts are easily placed in every no-dig sleeve, and are built to last in the harshest weather – from Arizona to Canada.

This includes:

  • 1 5/8th inches post (4 foot tall)
  • 1 no-dig sleeve
  • 1 decorative post cap
  • 2 post collars

NO-DIG SLEEVE FOR ALL FENCE SIZES ($25 each – shipping included)

This unique item is what allows our customers to avoid digging and using cement. This no-dig ground sleeve fits our 1 5/8 round posts perfectly. It requires a driving drive cap (which you have already received in your kit).

POST CORNER BRACE KITS FOR A 6 FOOT TALL FENCE
($99 each – shipping included)

The greatest tension on any post is at the the top where the tension cable goes through it. Using a cross brace we are able to transfer that tension back to the base of the post at ground level. This is what allows the post to resist the fence’s tension.

Our post corner kits come with:

  • (1) Galvanized black coated wall corner post
  • (1) Post cap insert
  • (2) 1 5/8 black galvanized powder coated braces
  • (2) Black self tapping screws
  • All required brace hardware



12 INCH KINKED GROUND STAKES ($45 for 30 stakes – shipping included)

The fence is flared in 6 inches flat onto the ground and secured with kinked stakes. This prevents dogs from digging under the fence. Ground stakes should be placed every 3-5 feet along the bottom of your fence.

  • 30 Ground Stakes in every box
  • Galvanized Steel
  • 1/4″ Thick Kinked
  • 12″ Long
  • Easy J Hook Design

12 GAUGE BLACK PVC COATED BRAIDED STEEL CABLE ($85 each – shipping included)

Our 12 gauge black PVC coated braided steel cable has a break strength of over 1200 lbs. This cable is used as a replacement for traditional top and bottom rails. To install the tension cable you simply put the cable through the eye lag of every post collar positioned at the top and bottom of every post.

This includes:

  • (1) 250 foot roll of braided steel cable
  • (6) Gripples

3 FOOT 1800+ POUND GALVANIZED RUBBER COATED WELDED WIRE  ($250 each – shipping included)

Our welded wire is used at the bottom portion of the fence as well as the dig guard. This new material has replaced the older 18 gauge metal hex wire. This premium 1800 pound break strength welded wire is combined with our 1000 pound polypropylene mesh to create a double layer of protection. Upon installation, this creates a fencing system that has a break strength of up to 2800 pounds. This helps prevent most dogs from chewing through the fence. In addition, the netting wire doesn’t just stop at the ground. It continues past where other fences stop, and is flared towards you. This prevents dogs from digging under the fence.

  • 3 foot tall
  • Each roll is 100 linear feet
  • Galvanized steel
  • Rubber coated
  • 1800 pound break strength
  • 1″ square opening size

4 FOOT 1800+ POUND GALVANIZED RUBBER COATED WELDED WIRE  ($300 each – shipping included)

Our welded wire is used at the bottom portion of the fence as well as the dig guard. This new material has replaced the older 18 gauge metal hex wire. This premium 1800 pound break strength welded wire is combined with our 1000 pound polypropylene mesh to create a double layer of protection. Upon installation, this creates a fencing system that has a break strength of up to 2800 pounds. This helps prevent most dogs from chewing through the fence. In addition, the netting wire doesn’t just stop at the ground. It continues past where other fences stop, and is flared towards you. This prevents dogs from digging under the fence.

  • 4 foot tall
  • Each roll is 100 linear feet
  • Galvanized steel
  • Rubber coated
  • 1800 pound break strength
  • 1″ square opening size

4 FOOT 1000+ POUND BREAK STRENGTH POLYPROPYLENE MESH  ($200 each – shipping included)

Our 1000 pound break strength (per square foot) polypropylene mesh is unlike any other mesh material in the market. Lesser quality competitors offer a 400 pound break strength version, but that’s simply doesn’t work for most breeds and larger dogs. It is strong yet flexible to prevent dogs from climbing your fence. 
In this clip a tree fell on our dog fence kit during a hurricane. All we had to do was lift the tree up and push it off our fence. If this was a traditional wood, vinyl, aluminum, or chain link fence the entire section would need to be replaced.

  • 4 foot tall
  • Each roll is 100 linear feet
  • Rounded strand tensile design
  • 2″ square opening size
  • UV protected with inhibitors for longevity

5 FOOT 1000+ POUND BREAK STRENGTH POLYPROPYLENE MESH  ($250 each – shipping included)

Our 1000 pound break strength (per square foot) polypropylene mesh is unlike any other mesh material in the market. Lesser quality competitors offer a 400 pound break strength version, but that’s simply doesn’t work for most breeds and larger dogs. It is strong yet flexible to prevent dogs from climbing your fence. 
In this clip a tree fell on our dog fence kit during a hurricane. All we had to do was lift the tree up and push it off our fence. If this was a traditional wood, vinyl, aluminum, or chain link fence the entire section would need to be replaced.

  • 5 foot tall
  • Each roll is 100 linear feet
  • Rounded strand tensile design
  • 2″ square opening size
  • UV protected with inhibitors for longevity

6 FOOT 1000+ POUND BREAK STRENGTH POLYPROPYLENE MESH  ($300 each – shipping included)

Our 1000 pound break strength (per square foot) polypropylene mesh is unlike any other mesh material in the market. Lesser quality competitors offer a 400 pound break strength version, but that’s simply doesn’t work for most breeds and larger dogs. It is strong yet flexible to prevent dogs from climbing your fence. 
In this clip a tree fell on our dog fence kit during a hurricane. All we had to do was lift the tree up and push it off our fence. If this was a traditional wood, vinyl, aluminum, or chain link fence the entire section would need to be replaced.

  • 6 foot tall
  • Each roll is 100 linear feet
  • Rounded strand tensile design
  • 2″ square opening size
  • UV protected with inhibitors for longevity

HOG RINGER: 9/16″ TOOL  ($120 each – shipping included)

Our Hog ringer crimping hand tool uses rings that are 9/16 galvanized to create a circle shaped crimp around an object. This tool is used to hog ring our unique fencing materials to the tension cable or to other fencing materials. It can be used to repair sections of damaged fencing.

 9/16″ HOGRINGS – 2500 count  ($40 each – shipping included)

Our hog rings work like staples. They are used to secure the top and bottom tension cable to the mesh fencing. Use these hog rings with the hog ringer tool and secure one hog ring every 2-3 feet. These hog rings are galvanized so they will last as long as the fence. Each box comes with 2,500 hog rings in strips for easy loading and use.